Velodyne VX-11 Manual de usuario descargar pdf (Pagina 8)

www.velodyne.com

VX-11 User’s Manual

1 SPEAKER LEVEL OUTPUT terminals

The speaker-level signal to the front speakers is distributed from

these terminals.

2 SPEAKER LEVEL INPUT terminals

Connect these input terminals to the speaker output terminals

of your amplifier or receiver

3 LINE INPUT jacks

Connect these jacks to the LINE OUT jacks of the amplifier.

4 VOLUME LEVEL knob

Use this knob to adjust the output level of the subwoofer.

5 Power indicator

Red: Unit is in standby mode.

Green: Unit is in operation mode.

(automatically turns to ST

ANDBY mode if no signal for eight min.)

6 LOW-P

ASS CROSSOVER

Use this knob to select the high-frequency range at which you wish

to cut-of

f the signal to the subwoofer.

7 PHASE SWITCH

Use this switch to invert the phase of the subwoofer to create a better

blend with your satellite speakers.

Crossov ers

Receiver/Processor Subwoofer Outputs

The Velodyne subwoofer is designed to operate using the full range audio signal for input when

using the built-in crossover. Many home theater processors/receivers (Dolby Digital™, DTS™,

THX™) have a “subwoofer out” jack (sometimes labeled “LFE”) that is internally filtered, settable

at the receiver/processor, and designed to be used with a powered subwoofer. In some

installations, it may be beneficial to use BOTH the Velodyne crossover and the

receiver/processor crossover, resulting in a steeper ultimate crossover slope. In some rare

cases, combining both an external crossover and the one internal to the subwoofer may result

in low output and increased noise. In these installations you may need to bypass the crossover

in either the processor or your VX-11 subwoofer. Or, simply set one crossover to a higher

frequency (such as 120 Hz) will restore maximum performance.

(Refer to Figure 2a Line-Level Subwoofer Connection Diagram and Figure 2b Speaker-Level

Subwoofer Connection Diagram, pages 7 and 8 for connection diagrams.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Velodyne VX-11 Manual de usuario Pagina 8